Revisions to Technical Requirements and Regulations for Radio Interference

The Federal Office of Communications of Switzerland sets out the basic technical requirements and updates to radio interference regulations for radio and telecommunications equipment.

With this revision, from March 17th, 2022, hand-held mobile telephones will have to be fitted with technical solutions ensuring that the location of the caller will be transferred in emergency communications

This is the implementation of the Commission's delegated regulation (EU) 2019/320 of December 12th, 2018 supplementing Directive 2014/53/EU of the European Parliament and of the Council with regard to the application of the essential requirements referred to in Article 3(3)(g) of that Directive in order to ensure caller location in emergency communications from mobile devices.

Several Radio Interference Regulations (RIR) in the domains of DVB-T, Point-to-Point, non-specific SRD (short range device), and automotive radar will be deleted:

  • RIR0201-70
  • RIR0302-01
  • RIR0302-02
  • RIR1008-39
  • RIR1012-08

Three RIR in the domain of UWB (Ultra wide Band) will be merged into two in order to be in line with the ECC/DEC/(06)04:

  • RIR 1023-02 and RIR1023-03 remain
  • RIR1023-01 will be deleted

In the domains of FSS (Fixed-Satellite Service) Earth Stations and Radio microphones and ALD (Assistive Listening Devices) four RIR will be created due to changes in the ECC/DEC/(17)04, ECC/DEC/(18)04, ECC/DEC/18(05) and the ERC REC 70-03:

  • RIR0806-22
  • RIR0806-23
  • RIR0806-24
  • RIR1009-20

In the domains of DVB-T and BWA (Broadband Wireless Access) the frequency range of two RIR will be reduced:

  • RIR0201-72: lower boundary new 470 MHz instead of 174 MHz
  • RIR0301-03: upper boundary new 3500 MHz instead of 3600 MHz

In the domains of ITS (intelligent transport system) and non-specific SRD, the frequency range of two RIR will be extended due to changes in the ECC/DEC/(09)01 and ERC REC 70-03:

  • RIR0510-04
  • RIR1008-40

In the domain of non-specific SRD, some application restrictions will be removed in order to be in line with the ERC REC 70-03:

  • RIR1008-05
  • RIR1008-07
  • RIR1008-22

In the domain of non-specific SRD, the channelling and power density requirements will be removed in order to be in line with the ERC REC70-03:

  • Channeling: RIR1008-20, RIR1008-38
  • Power Density: RIR1008-31

In the domain of non-specific SRD, some application restrictions and channel access rules will be removed due to changes in the ECC/DEC/(05)02:

  • RIR1008-33
  • RIR1008-34
  • RIR1008-35

In the domain of non-specific SRD, the transmit power will be adapted in order to be in line with the ERC REC 70-03:

  • RIR1008-02

Thinking about compliance testing and certification?

Contact us today for a free consultation or more information.

Get In Touch